Module

Name

Comment

Default Value

gb

mail_footer

Mail footer

Notice: The information contained in this e-mail message and any attached files may be confidential information. If you are not the intended recipient, any use, disclosure or copying of this e-mail is unauthorised. If you have received this e-mail in error, please notify the sender immediately by reply e-mail and delete all copies of this transmission together with any attachments

gb

mail_footer_html

Used to add a footer to HTML markup in mail messages

Inserting HTML markup here will corrupt the structure in the Wiki so a working example is not possible

gb

mail_send_block_flag

This flag turns system emailing on or off. If the flag is 'no', emailing is active. Visit the Mail Send Block Flag page for full details

no

gb

mail_sender_address

If you have an email configured without a sender's address, the email will use this address. If both and this control are blank, the email's status will be set to 'failed'. This value is blank when a new system is created and needs to be updated during configuration

gb

mail_sender_domains_enforcing_flag

Used to control the status of Domain enrolling of SPF Records

no

gb

mail_smtp_parameters

This control can be used to set alternate settings to SMTP. Alternative settings will not allow Catch-e to manage and report bouncebacks

gb

mail_to_address

Record the email address that should be used if the user launches the help icon that is displayed on the system login page. This value is blank when a new system is created and needs to be updated during configuration

gb

mail_to_system_notification

Store the email address to receive system notifications

gb

maximum_gst_claimable

Maximum GST credit that is claimable. Also visit the LCT Limits page for more details

6191.00 (Effective From 2023-07-01)

gb

medicare_levy

Medicare levy

d:0.02

gb

medicare_levy_adjustment_scale_2

Medicare levy adjustment scale 2

gb

medicare_levy_adjustment_scale_6

Medicare levy adjustment scale 6

gb

medicare_levy_adjustment_scale_7

Medicare levy adjustment scale 7

gb

module_access

These are used to set access to the Quote and Packaging modules. Module access is defined in your Hosting Agreement with Catch-e. The most common and popular setup is shown. If the module is set to 'yes', the module screens are available to your users if their roles are also configured to allow this. Visit the System Menus page to see how access is configured for each role. If these settings are updated, the changes will not take effect until Catch-e is re-launched in a new browser screen. Quotes: yes, Packaging: no

gb

page_response_notification_threshold

Send notification email to system@catch-e.com.au if the server response time crosses the set threshold. The server response on every page can be checked by looking at footer part that says "server response time is x seconds". Default setting is 30 seconds

30

gb

page_response_notification_frequency

Minimum number of seconds between email notifications to Catch-e for slow server response time. Default setting is 60 seconds

60

gb

page_response_notification_last_sent

Stores the timestamp when page_response_notification_threshold has sent the last notification email to Catch-e

b:0;

gb

password_auto_recovery_flag

If set to 'yes', users can reset their own passwords. Visit Resetting Passwords for full details

no

gb

password_exclude_dictionary_words_flag

If set to 'yes', a dictionary word more than certain number of characters cannot be saved. The number of characters is defined by password_maximum_dictionary_word_size. Visit Password Setup for full details

no

gb

password_forgotten_message

On screen message when a password reset requested. Visit Resetting Passwords for full details

Thank you. An e-mail will be sent to your registered e-mail address shortly with further instructions for resetting your password. If you do not receive an e-mail within 10 minutes please call your system administrator

gb

password_forgotten_user_id_message

On screen message when a user has forgotten their User ID or has requested a password reset and they are already 'suspended'. Visit Resetting Passwords for full details

Please contact client by phone on 1300 XXX XXX or by email client@client.com.au

gb

password_history_size

Describes how many times a password needs to be changed before it can be re-used. Visit Password Setup for full details

12

gb

password_maximum_dictionary_word_size

Defines the number of characters that a dictionary word can be embedded in password. This global control becomes irrelevant if password_exclude_dictionary_words_flag is set to 'no'. Visit Password Setup for full details

4

gb

password_minimum_length

Minimum length required to set a password. Note: a minimum length of four is required, regardless of the value set here (for example: if this is set to '3', '4' will be applied as the rule). Visit Password Setup for full details

8

gb

password_requires_number_flag

If set to 'yes', password cannot be saved without having a number. Visit Password Setup for full details

yes

gb

password_requires_letter_flag

If set to 'yes', password cannot be saved without having a letter. Visit Password Setup for full details

yes

gb

password_requires_upper_case_letter_flag

If set to 'yes', password cannot be saved without having an upper case letter. Visit Password Setup for full details

yes

gb

password_requires_lower_case_letter_flag

If set to 'yes', password cannot be saved without having a lower case letter. Visit Password Setup for full details

yes

gb

password_requires_special_character_flag

If set to 'yes', password cannot be saved without having special characters like !, @, #, $ etc. Visit Password Setup for full details

yes

gb

password_reset_access_denied_message

Password Reset URL expired message. Visit Resetting Passwords for full details

The Password Reset hyperlink has expired. To generate another link, please click on Reset Password on the Login page

gb

password_reset_active_session_exists_message

Password Reset URL already exists. Visit Resetting Passwords for full details

An email containing password reset instructions has already been sent to your registered email address. Please follow the instruction in that email. Only one password reset email can be active at a time

gb

password_reset_success_message

Password Reset success message. Visit Resetting Passwords for full details

Your password has been reset. Re-Login is required. Please close this window and re-login to the system using your normal login process. Thank You

gb

payg_coefficients_scale_1

PAYG coefficients scale 1

gb

payg_coefficients_scale_2

PAYG coefficients scale 2

gb

payg_coefficients_scale_3

PAYG coefficients scale 3

gb

payg_coefficients_scale_4

PAYG coefficients scale 4

gb

payg_coefficients_scale_5

PAYG coefficients scale 5

gb

payg_coefficients_scale_6

PAYG coefficients scale 6

gb

payg_coefficients_scale_7

PAYG coefficients scale 7

gb

payg_ftb_offset_rates

PAYG FTB offset rates

gb

pay_cycle_billing_rounding_method

This control is used to specify the rounding calculation that is to be applied to the calculation of when a rounding method is required. Values may be 'floor', 'ceil', 'round' or 'none'. Catch-e does not recommend setting this to 'none' as this creates rounding issues in budget calculations. Use either 'floor', 'round' or 'ceil'. This can be updated at a particular effectivedate if needed. This control is also applied when recalculating Contracts / Billings "Total Billings" if "Periodic Interval" is changed away from a 'Monthly' setting. Visit Pay Cycle Billing for more details. Floor example: ROUNDDOWN (billing_periods/12 pay_cycles_per_year) = pay_cycle_billing_periods. Ceil example: ROUNDUP (billing_periods/12 pay_cycles_per_year) = pay_cycle_billing_periods. Round example: ROUND (billing_periods/12 pay_cycles_per_year, 0) = pay_cycle_billing_periods. None example: billing_periods/12 pay_cycles_per_year = pay_cycle_billing_periods to 5 decimal places

ceil

gb

psd_rates_nsw_ev_dutiable_value_threshold

Purchase Stamp Duty Rates are stored here. See Purchase Stamp Duty (exemptions) for further details

0.00

gb

psd_rates_qld

Purchase Stamp Duty Rates are stored here. See Purchase Stamp Duty for further details

gb

psd_rates_vic

Purchase Stamp Duty Rates are stored here. See Purchase Stamp Duty for further details

gb

reg_ctp_uplift_rate

Registration CTP uplift rate. Go to Registration for full details of registration calculations and setup

d:0.1

gb

report_budget_fees_as_actual_flag

This flag changes what is calculated and shown in the Actual column of Driver Report for the row "Fees". The posting classes MFEE, IFEE, NFEE, FEE and MCLB are totalled in this row. If this flag is set to "yes", the values of both the amounts billed (Budget) and maintenance + payments records (Actuals) for those posting classes are shown as Actual. If this flag is set to "no", only actual costs from the maintenance records will be shown

yes

gb

reports_not_available

Enter reports here to exclude them from the Fleet / Administration / Reports "Report Title" drop list. Contact Catch-e Support for assistance with this update. Examples: assetlist, driverfbt, driverfbtoperating, clientlogin

gb

report_queue_timeout_to_background

Allocates an allowable time to run a system generated report from either Fleet/Administration/Reports or Reporting/Standard Reports menus where the 'Report Queue' flag is checked OFF. When this time is exceeded, the completed report will be sent to the Report Queue screen. If the user has the Report Queue Notifications flag checked ON, an email will be sent alerting the user to the report being available from the Report Queue screen

600 (10 minutes)

gb

rest_rate_limit

This control restricts the number of combined REST call requests that can be made to APIs in a given interval. If the limit is reached, the legacy APIs will return the following error: 'CATCHEERRORTOOMANYREQUESTS'. The current token-based APIs will return a HTTP 429 response: "Too many requests". "Minutes" stores the size of the window for the limit calculation. In most cases, this will be set to 1. "Requests" stores the maximum number of requests that can occur within the specified "Minutes" window. The rest_rate_limit is calculated dynamically using the sliding scale calculation. This control is only visible to Catch-e staff. Do not try to edit this control by other means. Contact Catch-e Support to request confirmation of your entries or changes to this setting

Minutes: 5, Requests: 200

gb

rest_rate_limit_ip_whitelist

This control contains a list of the IP addresses that the rest_rate_limit stored above will not apply to. This control is only visible to Catch-e staff. Do not try to edit this control by other means. Contact Catch-e Support to request confirmation of your entries or changes to this setting

127.0.0.1, xx.xx.xx.xx

gb

revs_fees

This field no longer exists in gb_controls. Visit the REVS page for an overview of the current functionality

gb

role_fbt_declaration_session_timeout_maximum

See FBT Declaration Email for full details of this feature. The value is expressed in seconds (for example: 60 seconds times 60 minutes times 24 hours times 62 days = 5,356,800)

s:7:"5356800";

gb

salesforce_apex_interface_enabled_flag

If you have a Salesforce CRM interface with Catch-e and you are using the REST setup, this will be set to 'yes'. If you are using the SOAP setup, this should be set to 'no'

no

gb

salesforce_interface_email_on_error

If you have a Salesforce CRM interface with Catch-e and you are using the SOAP setup, enter an email address here if you want to receive an email if there has been a Salesforce update error

gb

salesforce_interface_enabled_flag

If you have a Salesforce CRM interface with Catch-e and you are using the SOAP setup, this control is set to 'yes'. If you have a Salesforce CRM interface with Catch-e and you are using the REST setup, this should be set to 'no'. In the Support environment, this is updated to 'no' on refresh to prevent the function from being triggered

no

gb

salesforce_interface_service_worker_enabled_flag

If you have a Salesforce CRM interface with Catch-e and you are using the SOAP setup and use AWS SQS, this control will be set to 'yes' to queue jobs using a first in first out basis. If you have a Salesforce CRM interface with Catch-e and you are using the REST setup, this should be set to 'no'

no

gb

sms_global_provider_details

Enter the login details provided by your provider which must be SMS Global. These fields are encrypted. API Key and API Secret

gb

sms_provider

To use the 'sms' method for 2FA the provider must be SMS Global. The control value to use is 'smsglobal'

gb

temporary_password_flag

Turns on temporary passwords feature for the clients

no

gb

url_chart_image_generator

URL hosting Chart Image Server. Usually on VPS Container 102 on current host

e.g. http://highcharts-export.catch-e.com.au:3003

gb

url_html2pdf_rasterizer

URL for HTML to PDF Rasterizer service

gb

web_services_access_flag

Legacy Web Services are being progressively deprecated and the planned end date is 31/12/2024. When this control set to 'no': 1. Legacy web services cannot be run. 2. Driver Portal View my balance (Legacy) cannot be run. If you are using HTML Quote template please see additional changes. This control is only visible to Catch-e staff. Do not try to edit this control by other means. Contact Catch-e Support to request changes to this setting

no

gb

web_services_upsert_access_flag

Legacy Web Services are being progressively deprecated and the planned end date is 31/12/2024. When this control set to 'no', the web service upsert cannot be run. upsert can only run if web_services_access_flag = 'yes' and web_services_upsert_access_flag = 'yes'. This control is only visible to Catch-e staff. Do not try to edit this control by other means. Contact Catch-e Support to request changes to this setting

no

gb

whole_table_export_timeout

This control records the time that is allowed for a Whole Table Export. The default value is 30 (30 seconds). If the export exceeds this time, the export will be cancelled, the export_sample_rows_only_flag will be set to 'yes' for that table, and the user will see the following message: "Whole Table export has exceeded max execution time. Contact Support for assistance."

30

gb

xls_controls_format

Enables changes to be made to the default settings of system reports. For example, logo size can be amended to fit on the report. These controls can also be included in the report query to ensure the output has specific results. More information can be found in the Advanced Spreadsheet Formatting section